On the upper part of these jaws there is an indentation that allows the holding and clamping of workpieces to be drilled or threaded from side to side where the tool can pass through the lower part of the piece.
They are made of casehardened, tempered steel and all faces and the indentation are ground.
Tipology:
Mechanical
Technical data
Material: UNI 18 NiCrMo5
Features: Hardened HRC 56/58 ±2 Steel
| TYPE | 100 | 125 | 150 | 175 | 200 |
|---|---|---|---|---|---|
| A | 99.5 | 124.5 | 149.5 | 174.5 | 199.5 |
| B | 39.6 | 49.6 | 49.6 | 49.6 | 49.6 |
| C | 9.5 | 11.5 | 11.5 | 11.5 | 11.5 |
| D | 56 | 65 | 88 | 102 | 110 |
| E | 56 | 65 | 88 | 102 | 110 |
| F | M8 | M10 | M10 | M10 | M10 |
| G | 16,5 | 20.5 | 20.5 | 20.5 | 20.5 |
| H | 8.5 | 10.5 | 10.5 | 10.5 | 10.5 |
| I | 5 | 5 | 5 | 5 | 5 |
| L | 5 | 5 | 5 | 5 | 5 |
Note: Features and dimensions are subject to change.
*Fixed jaw
**Moving jaw
Related products
Request information
"*" indicates required fields
