This vice provides very high clamping force without any special effort by the operator, thanks to a special
hydraulic unit.
The clamping pressure can be checked on the gauge and adjusted by the operator so as to achieve repeatable positioning with the same pre-set pressure.
The hydraulic unit allows the jaws to approach the piece mechanically and to automatically provide the pre-set pressure. The clamping is extremely safe and does not require any special effort from the operator.
During the release phase, the pressure decreases thus disabling the hydraulic device, and the jaws move away from the piece mechanically. All contact surfaces are properly ground.
The vice is supplied with ground flat jaws made of casehardened and tempered steel.
Prismatic jaws to clamp cylindrical pieces are available on request.
Technical data
Material: Cast iron GS 600-3 UNI 4544
Breaking load: Rmin = 61
Elongation %: A% = 3
Brinnel hardness: HB = 190÷270
| TYPE | 150 | 175 | 200 |
|---|---|---|---|
| A | 86.5 | 96.5 | 106.5 |
| B | 200 | 250 | 300 |
| C | 650 | 708 | 763 |
| D | 60 | 70 | 70 |
| E | 520 | 535 | 645 |
| F | 150 | 175 | 200 |
| G | 112 | 127 | 127 |
| H | 52 | 57 | 57 |
| L | 25 | 25 | 25 |
| M | M10 | M10 | M10 |
| N | 37.5 | 45 | 50 |
| O | 10 | 10 | 10 |
| P | 120 | 130 | 140 |
| R | 121 | 131 | 131 |
| WEIGHT KG | 46 | 74 | 89 |
Note: Features and dimensions are subject to change.
| MOM TYPE 74 N | 150 | 175 | 200 |
|---|---|---|---|
| BAR MAXIMUM LIMIT | 250 | 300 | 350 |
| F (KN) | 48 | 55 | 65 |
Note: Features and dimensions are subject to change.
Related products
Request information
"*" indicates required fields
